We manufacture a range of DMX Control modules for special effect and custom applications. We also offer an OEM service for custom applications- please contact us with your requirements for either the dedicated DMX decoder/encoder chip or a complete board assembly.
DMX Audio Potentiometer
DMX Audio Potentiometer. Four channel volume control
unit for use over the DMX network. Features logarithmic taper tracks with zero
crossing feature to minimise any wiper noise. Select either 4 x mono channels
(requires 4 DMX channels) or 2 x stereo operation (requires 2 DMX channels).
Front panel features individual channel leds that indicate the current level of
attenuation on a particular track. 5-pin XLR DMX connectors, 1/4" jack audio
in/out sockets. Requires 9V DC at 500mA. Cased.
DMX-Audio Potentiometer, Part # 1-567 at £97.00 each
DMX Theatre Lighting /Disco Controller
The DMX board provides the essential interface between PC and Microcontroller applications and the industry standard DMX network protocol as used in many theatre lighting and disco systems.
It has been designed as a flexible interface device to the very fast DMX512 network to allow enthusiasts to develop their own computer controller lighting and special effects with the minimum amount of electronics. The DMX board can be configured to act as a transmitter or receiver unit with the following features:
Transmit Mode
Receive Mode
The DMX Board is supplied with a Windows demonstration programme plus all VBASIC code to assist with individuals development projects.
Click here for the full data sheet
Click here to download the Windows software
DMX Controller, Part # 1-463 at £65.00 each
512 Channel Serial to DMX transmitter
New 512 DMX Channel transmitter with serial input.
Store up to 60 scenes (128 channels per scene) on the module and switch in by simple rs232 command or, for scenes 1 through 8, by manual switches. Simple command set.
Download the data sheet here:Data sheet
Download the sample driver software here:1-553 ZIP file and the Windows control software: Windows software
Bulk Data loading/editing utility programme for the 1-553: DMXGrid
512 Channel Transmitter, Part #1-553 at £65.00 each
DMX-Test Module
DMX-Test Module, Part #1-560 at £49.00 each
DMX Receiver Module
DMX Receiver Module provides up to 8 outputs which may
be controlled from a DMX bus. Outputs suitable for either driving standard
Triac dimmers (eg Crydon D2410-10, Digi-key part # CC1079-ND), standard RC type
servos, simple digital on-off or a combination of two of these. For PWM
applications requires a 9-0-9 V AC power supply.
DMX Receiver Module, Part #1-497 at £50.00 each
DMX Relay Board
New DMX Relay Board. 8 Digital relay outputs which may
be controlled from a DMX system. Base address may be set between 1 and 504.
Works with full speed DMX signal stream (44 updates /sec)
DMX Relay Board, Part #1-493 at £59.00 each (12V DC Supply)
DMX relay board housed in custom plastic case with 8 rear knock-out holes for cables and 8 relay status leds.
Cased DMX Relay Board, Part #1-562 at £84.00 each (12V DC Supply)
Uncased DMX Board without any relays, Part # 1-563 at £49.00 each
2-Channel DMX Relay Board
A twin channel version of the DMX Relay Board. Single
pole changeover relays rated at 250V AC / 10Amps just the job for controlling
simple equipment from the DMX network.PCB tracked to allow use of solid state
relays also. Base address may be set between 1 and 512. Works with full speed
DMX signal stream (44 updates /sec). LEDS indicate relay and valid DMX signal
status. Requires 12V DC supply.
2- Channel DMX Relay Board, Part #1-564 at £42.50 each
DMX Switch
A single channel version of the DMX Relay Board. Single
pole changeover relay rated at 250V AC / 10Amps just the job for controlling
simple equipment from the DMX network. Base address may be set between 1 and
512. Works with full speed DMX signal stream (44 updates /sec). LEDS indicate
relay and valid DMX signal status. Requires 12V DC supply.
DMX Relay Board, Part #1-558 at £29.00 each
DMX Servo Controller
A single channel R/C type servo motor controller for
standard servos drawing up to 600mA. Requires one DMX channel and generates
servo control pulses between 1msec and 2msec giving a standard range of 90
degrees rotation. Base address may be set between 1 and 511. Works with full
speed DMX signal stream (44 updates /sec). LEDS indicate relay and valid DMX
signal status. Requires 7.5 to 9V DC supply.
DMX Servo Controller Board, Part #1-561 at £29.00 each
DMX (Servo) Motor Control Board
DMX Servo Motor Drive Board. Can be confiigured as a
powerful R/C servo replacement or as a reversible, variable speed drive for DC
motors up to 24V @ 5 amps continuous. Base address may be set from 1 to 512,
controller includes a setting potentiometer for adjustment without the need for
an incoming DMX signal and connection points for limit switches. Requires 2 DMX
channels: a position/speed byte and a power amplifier enabled byte.
Download the full data sheet here
DMX Servo Motor Controller Board, Part #1-550 at £99.00 each
DMX- PWM and Stepper Driver Board
DMX PWM and stepper driver board may be configured to provide either 4 channels of 8-bit PWM suitable for driving LED (eg RGB) displays or with the flick of the on-board DIP switch, to generate full wave signals to drive standard unipolar stepper motors.
PWM update rate is 2kHz on all 4- channels at 8-bit resolution
Stepping speed adjustable between 0.5msecs and 128msecs per step.
Base address settable between 1 and 509
MOSFET output drivers
DMX- PWM and Stepper Driver Board, Part # 1-556 at £50.00 each
.
DMX Video Switch Driver Board
DMX Video switch board has 4 standard video input channels (either PAL or NTSC) and one output channel. The incoming DMX data value determines which video input is routed to the output. Requires 1 channel of DMX data.
.
DMX-Video Switch Board, Part #1-557 at £69.00 each
DMX MP3 Player
DMX MP3 player. Control all your sound effects from the
one desk. Play back up to 255 pre-recorded sound tracks from a standard MP3
card. Includes full volume and balance controls plus many other features. Line
level stereo outputs. Includes Windows software for loading files to the flash
card. 5-pin connectors. Requires 9V DC at 500mA. Cased. Requires 4 DMX
channels.
DMX-MP3 Player, Part # 1-554 at £199.00 each
DMX - Voltage Converter
DMX to Voltage converter board. 4 Channels with output
between 0 and 10V DC with 8-bit resolution and at up to 20mA per channel. Base
address selectable between 1 and 508. Twin 5-pin XLR connectors. Requires 12V
DC at 500mA.
Download the provisional data sheet here
DMX-Voltage Converter, Part # 1-559 at £49.00 each
| Home | Top |
