What can you do with eight 32-bit processors (COGs) in one chip? Real simultaneous multi-processing!
The Propeller chip is programmed in both a high-level language, called Spin™, and low-level (assembly) language. With the set of pre-built Parallax “objects” for video, mice, keyboards, RF, LCDs, stepper motors and sensors your Propeller application is a matter of high-level integration. The Propeller product line is recommended for those with previous microcontroller experience.
Propeller® Chips
Propeller 40-pin DIP chip, Parallax reference # PBX32A-D40.
Milford Part number 1-200 at £9.00 each.
Propeller QFP chip, Parallax reference # PBX32A-Q44.
Milford Part number 1-201 at £9.00 each.
Propeller QFN chip, Parallax reference # PBX32A-M44.
Milford Part number 1-202 at £9.00 each.
Propeller Starter Kit
The Propeller Starter Kit includes includes the Propeller Demo Board, the Propeller Manual, software on CD and a USB cable. The Propeller Demo Board includes a built-in Propeller (P8X32A-Q44), EEPROM and 5 MHz crystal pre-wired to connectors for interfacing to devices such as a mouse, keyboard, TV or VGA monitor and speakers. This is all configured for immediate use by many objects from the Propeller Object Library (included with the Propeller Tool software). In just a few minutes you can see some of the impressive tasks the Propeller can perform. Requires 7.5v power supply.
Propeller Starter Kit, Milford Part # 1-210 @ £95.00 each
Propeller Proto Board
Parallax’s Propeller Proto Board is a low cost, high quality solution for permanent projects using the Propeller chip. To save the user some expense, the USB programming interface is not included on the Propeller Proto Board; we suggest you purchase a Prop Plug for programming your Propeller Proto Boards. This board is also ready for use with the Prop Clip, and is also compatible with the USB2SER with the addition of a 4-pin header (not included). Features of the Propeller Proto Board include: P8X32A-Q44 Propeller chip 64 KB EEPROM for program and data storage LM1086 5V and 3.3V regulators provide up to 1.5 Amps with an input power supply of 6-9 VDC . Three-position power switch (off, logic power, power to logic and servo ports) Sockets for 4 servos Removable 5MHz crystal Access to all 32 I/O pins Large amount of prototyping area Unplated row of holes along perimeter to provide stress relief to off-board connections Same mounting holes as the Board of Education (3” x 4”) for compatibility with the Boe-Bot® robot
Propeller ProtoBoard, Milford Part # 1-220 @ £16.00 each
Propeller Demo Board
The new Propeller Demo Board, Rev C. visibly demonstrates the Propeller's varied capabilities in a compact and fun platform. You can use it to learn Propeller programming and then develop full-blown applications which generate video and sound, and utilize mice and keyboards. All the requisite power supply and USB loading circuitry is provided for you. Eight unused I/O pins are available for experimentation. Kit includes Propeller Demo Board and a USB A to Mini B Cable. Requires a 7.5 Volt 1 Amp Power Supply. Main features of the Propeller Demo Board:
Propeller Develpment Board, Milford Part # 1-216 @ £79.00 each
Prop Clip and Prop Plug
The Prop Clip and Prop Plug each provide a USB-to-serial port connection that is convenient for microcontroller programming and communication. These tiny devices are capable of asynchronous communication at up to 3 M baud with both 3.3-volt and 5.0-volt devices such as the Propeller and BASIC Stamp. The Prop Clip grips onto the edge of a PCB (62.5 mil; 1/16", or 31.25 mil; 1/32"), connecting to the board's four 0.1" spaced, plated-through holes. This allows OEM boards to be manufactured with in-circuit programming capability without the extra cost of additional components or labor. If programming via 0.1" male headers is required, use the Prop Plug instead. Note: USB A to Mini B Retractable Cable is included .
Prop Clip, Milford Part # 1-219 @ £20.00 each
Prop Plug, Milford Part # 1-218 @ £20.00 each
Propstick
Please note - this is an assembled version of the Propstick. We decided that assembly may be tricky for some customers so these are assembled by us and tested for communciations with the PC and with the Compile/Load to EEprom function tested.
Milford Part number 1-215 at £65.00 each
Propeller Accessories Kit
This kit contains a Parallax PS/2 Mini-Keyboard, Parallax PS/2 Optical Mouse and a 2.5" LCD A/V Display. Using objects written by Parallax the Propeller is capable of reading input from a standard PS/2 keyboard and mouse, as well as output data to an NTSC Display. The Propeller Accessories Kit provides all three I/O peripherals in one package making it easy to get started. The Propeller Demo Board makes using these devices even easier by providing the necessary connectors and power. You can also write your own objects for these devices or customize the Parallax ones provided.
Propeller Accessories Kit, Milford Part # 1-217 @ £75.00 each
HYDRA Game Development Kit
Develop games, graphics and media applications with the Propeller Powered HYDRA Game Console. For beginner to intermediate coders, you need only basic programming experience in any BASIC or C-like language. All of the hardware and software you need are included (as shown in pictures), along with the comprehensive book on game programming for the Propeller in Spin and assembly language - "Game Programming for the Propeller Powered HYDRA". Within the book, the HYDRA hardware is covered in detail with schematics, descriptions, and tips allowing you to take full advantage of its resources, including its expansion port and game card. Note: Printed book is black and white.
Kit comes complete with HYDRA unit, book, 128K Memory card, Blank Experimenter card, mouse, keyboard, gamepad, video and USB cables, CD and more! Written by best-selling game development author Andre’ LaMothe, the included book is your complete guide to developing games, graphics, and media applications for the Propeller Powered HYDRA Game console. The book assumes you have only basic programming experience in any BASIC or C-like language. It covers all aspects of the Propeller chip from its architecture to using the Propeller Tool IDE for programming in both Spin and assembly language, with numerous demo programs to use as starting points for your own games. Included on the CD is all the source code and executables for all the included, games, demos, tools and examples. Additionally, “HYDRA Tiny BASIC” based on the “Tiny BASIC” specification originally published in “Dr. Dobb’s Journal” in 1975 is included. With this classic version of BASIC you can write programs directly on the HYDRA without the need for a PC! Simply load BASIC into the HYDRA or on the included game cartridge and you are up and running with nothing more than your TV and keyboard. The HYDRA is not only a game console, but a complete computer system with everything you need to get started exploring the fascinating world of game development and the new multiprocessing Propeller Chip!
Requires 7.5V Power supply.
Hydra Development Kit, Milford Part # 1-250 @ £165.00 each